Semi Automatic Residential Water Filter SAFM09


 Type  Product
 Code
 Maximum continuing service flow rate (lpm)  Backwash flow rate (lpm)  Minimum - maximum operating pressure (kpa)  Inlet outlet (mm - male)  Approx. shipping weight (kg)
 Multimedia  SAFM09  30  23  250 - 690  20  42
 Carbon  SAFC09
 SAFC12
 9
 15
 16
 25
 250 - 690  20  18
 44
 Neutraliser  SAFN09
 SAFN12
 10
 18
 16
 25
 250 - 690  20  53
 68
 Birm  SAFIB10 
 SAFIB12
 10
 15
 20
 25
 250 - 690  20  45
 80
 Greensand

 MFIM10
 MFIM12

 10
 15
 20
 25
 250 - 690  25  65
 120


 Type  Product  
 Code
 Operating Parameters
 Multimedia  SAFM09  water temp 5 - 45 water ph 5.5 - 9.0 suspended solids max 100 mg / l iron no effect oil free of hydrocarbons Note: not recommended for Colloidal Sediment removal.  
 Carbon  SAFC09
 SAFC12
 water temp 5 - 45 water ph above 5.5  suspended solids max 10 mg / l iron will effect service life oil free of hydrocarbons Note: service flow rate may need to be reduced for extended contact time. Refer IBC Water.
 Neutraliser  SAFN09
 SAFN12
 water temp 5 - 45 water ph above 5.5  suspended solids max 50 mg / l iron max 0.5 mg / 1 oil free of hydrocarbons
 Birm  SAFIB10
 SAFIB12
 water temp 5 - 45 water ph 6.8 - 8.8 birm, 6.2 - 8.8 manganese greensand  suspended solids max 50 mg / l iron & MANGANESE max 15 mg / 1 oil free of hydrocarbons BIRM min 15% dissolved oxygen of iron level
 Greensand

 MFIM10 
 MFIM12

 Alkalinity should be greater than two times the combined sulfate and chloride concentration. Note: due to the complexities of iron, manganese and hydrogen sulphide it is recommended that product selection be referred to IBC Water. *intermittent peak flows of up to twice service are possible dependent on iron/manganese level for